3
6.
Do not connect this driver to an air supply with
maximum potential pressure greater than 200 PSI,
(14 BAR).
7.
Never use oxygen, carbon dioxide, combustible
gases or any type of bottled gas as a source for this
driver. Explosion and serious injury may result.
8.
Only connect driver to the air supply with a coupling
that removes all pressure when disconnected.
9.
Disconnect the driver from the air supply before doing
maintenance, removing a jam, leaving the work area, moving to
another area or handing the driver to another person.
10. Connect the point driver to air supply before loading points to
prevent driving a point during connection. The driving mecha-
nism may operate when the driver is connected to air supply.
11. Never use the driver if it is leaking, has missing parts, or re-
quires repair. Make sure all screws and caps are securely
tightened.
12. Do not use the driver if the safety warning label is missing or
unreadable. Contact a Fletcher-Terry Customer Care Represen-
tative for a replacement.
13. Only use points, parts, and accessories recommended by
Fletcher-Terry.
14. Do not load points with the trigger depressed, to prevent uninten-
tional firing of a point.
16. Release trigger after firing a point. Never carry the driver with
your finger on the trigger.
17. Do not over-reach or use the driver from an awkward or insecure
position.
