7
How to Clear a Jammed Point
1.
IMPORTANT: Disconnect the driver from the air supply.
2.
Remove the two Lower Guide Mounting Screws (A),
Figure 6. The Lower Guide and the Stabilizing Shoe
can now be removed as an assembly.
3.
Unlatch the magazine and slide the cover open.
Maintenance (Daily)
1.
Disconnect the driver from its air supply.
2.
Clean the driver by wiping with a cloth. A non-flammable cleaning
solution may be used sparingly, but do not permit it to seep into the
driver where it may cause damage.
3.
Check all accessible screws to insure they are tight.
4.
Remove points and clean and inspect the magazine interior.
5.
Call a Fletcher-Terry Customer Care Representative if more exten-
sive repair or assistance is required. 1.800.843.3826.
A
Figure 6
4.
Push the jammed
point out of the opening
(B) in Figure 7. You can access it
from inside the magazine.
5.
Reassemble the Lower Guide and
Stabilizing Shoe to the driver with
the two screws removed in step 2.
6.
This procedure applies to both the Pneumatic FrameMaster® and
Pneumatic FlexiMaster®.
7.
Connect the driver to air supply, reload a stack of points and close
the magazine cover.
Figure 7
B
A
