"centre rail (2)". The brown and orange wires
go into socket 3, the yellow wire of the centre
rail goes into socket 4. The red connecting wire
from the turntable goes into socket 5. The blue
wire goes into socket 6 and the green wire into
socket 7.
Advice: The plug can only be inserted in one way
into the equipment. Thus it is not possible to "mix
up" the connections when inserting the plug.
Now we will create the power feed for the TURN-
CONTROL. You can feed the TURN-CONTROL
either with DC or AC power so long as the power
is continuous, between 14 volts and 16.5 volts.
2.2 Connection to a transformer
Using the connecting cable supplied, 39 6865,
connect the free ends of the wires onto - a) the
continuous AC output 14-16.5 V or - b) the
continuous DC output 14-16.5 V of the transformer.
This could be, for example, the black and white clips
of the AC output on a FLEISCHMANN transformer
6735. The small round plug on the other ends of the
wires is then inserted into the socket on the TURN-
CONTROL marked "Power 14 V ac/dc" (Fig. 2).
Possible FLEISCHMANN transformers: 6706, 6710,
6735, 6755, 6811.
Other transformers are connected up in a similar
manner.
Now the TURN-CONTROL is connected up and
ready for use.
31
1721_Betra_21_6915_0101.qxd 27.09.2007 12:15 Uhr Seite 31
