Flashforge Creator3, Руководство пользователя

Страница: 13 / 77

Creator3 User Guide | www.flashforge.com 400-699-1063
13
2.1.2 Terms
Build Plate
The surface on which the Creator3 builds an object.
Build Tape
The blue tape that covers Creator3’s build plate so that
the object can stick to the build plate well.
Build Volume
The three dimensional amount of space that an object
will use once it is completed. The largest build volume
of Creator3 is 300*250*200 mm.
Leveling Nuts
Nuts under the build platform that are used for
adjusting the distance between the nozzle and build
plate.
Extruder
The device that draws the filament from the spool,
melts it and pushes it through a nozzle into the build
plate.
Nozzle
Also called “print head”, which located at the bottom
of the extruder where heated filament is squeezed out.
Cooling Fan
To cool the outer assembly of the extruder and gear
motor.
Filament Intake An opening located at the top of the extruder.
Filament Guide Tube
A plastic piece that guides the filament from the
filament box to the filament intake.
Solid Glue Stick
A solid adhesive used for making the model stick to the
build plate firmly.
Unclogging Pin Tool
A tool that used for cleaning and unclogging the
extruder.
Stamping Wrench A tool that used for seizing the nozzle’s metal cube.
Filament Cartridge A specific box for placing FlashForge filament.