background image

 

 

 

USER MANUAL 

 

©2019 Flash Technology, LLC 

   

 

 

 

Page 5 

Handheld Controller 

– PAPI  

2.0 

Introduction 

2.1  Features 

The Handheld Controller has the following features: 

 

Wireless control range of up to 2.5 miles (4 km) of a wide range of products 

 

Sealed, rugged aluminum case with backlit keypad and Mil-spec connectors 

 

Controls up to 8 independent groups of products 

 

Advanced ARCAL, configuration, and diagnosis commands 

 

Administrator and User password controls 

 

Secure 256-bit AES encryption 

 

Rechargeable lithium ion battery pack 

 

 

 

 

 

 

2.2  Applications 

The Handheld Controller can control several products. This manual indicates the responses for the following 
product only and is hereinafter referred to as the controlled product. 

 

PAPI: 

Flash Technology wireless interface to Laser Guidance Precision Approach Path 
Indicator product (PAPI-253C). 

 

Refer to 47125 Handheld Controller User Manual for complete instructions on using the Flash 
Handheld Controller with other Flash products. 

Refer to LG-TM-253C-01, Technical Manual for Laser Guidance PAPI-253C operation. 

 

 

Содержание PAPI











Отзывы: