USER MANUAL
©2019 Flash Technology, LLC
Page 7
Handheld Controller
– PAPI
PAPI:
Press and release the GROUP SELECT push button once
Handheld Controller:
Continue with the following commands
3. Press
CONFIG
(CONFIG indicator starts flashing)
4. Press
ENTER
(CONFIG and SELECT GROUP indicators turn green)
5. Press
1
through
8
to select group number
6. Press
ENTER
Handheld Controller transmits group number and last operating mode to the controlled products
PAPI will FLASH to indicate acceptance of command
Controlled products enter
that group’s last operating mode
5 min. window of accepting grouping configurations is ended for controlled products
When you are finished configuring groups, exit CONFIG by:
1. Press
CONFIG
(CONFIG indicator starts flashing)
2. Press
ENTER
(CONFIG and SELECT GROUP indicators turn off)
When you add controlled products to a group, products already part of that group are not affected.
In this way, you can add to a group as you go without having to re-assign all products in that group.
Due to the critical importance of the PAPI as a navigation aid, it is recommended the
PAPI be controlled on a separate group from the rest of the airfield lights.
3.2.2 Battery Diagnose
The PAPI interface does not respond to battery diagnose commands.
