25
INSTALLATION, USE AND MAINTENANCE
Fläkt Woods
FIFLO EN 2014.09
All rights reserved.
Control System FICO-128
18 Disconnecting communication unit / relay unit
from the system
1
Go to
Log in
on the control unit using the arrow keys, and
press
ENTER
.
Log into the system using code 1000.
Go to
System mode
and press
ENTER
.
2
Select
Mode
and press
EDIT
, then press
ARROW DOWN
and then
ENTER.
3
Press
ESC
, go to
Config system
and press
ENTER.
4
Go to
System
and then press
ENTER.
5
Use
ARROW DOWN
to go to the line to be deleted and press
EDIT
twice.
Press
ARROW DOWN
and then
ENTER.
6
Press
ARROW RIGHT
to remove Group linkage. Press
EDIT
,
press
ARROW DOWN
, and then
ENTER.
7
Press
ESC
three times.
8
Check
Group
in the
Config system
menu.
Groups not in use under the
System
menu shall be
deactivated in the
Group
menu.
9
In this situation, you need not do anything, because only
Group A
is activated.
Press
ESC
twice.
10
Select
Save config and Exit
.
Press
ENTER.
11
Return to
Auto
, see Chapter 9.3.
12
Press now
INFO
to check the status.
INFO
