15
INSTALLATION, USE AND MAINTENANCE
Fläkt Woods
FIFLO EN 2014.09
All rights reserved.
Control System FICO-128
9 Settings
9.1 Logging into the system
1
Press
ENTER
on the control unit to enter
Menu
.
Go to
Log in
using the arrow keys, and press
ENTER
.
2
Log into the system using code 1000.
Use the arrow keys to select a number and press
ENTER
after each number. If your code was correct,
Login:
Level 1
is shown.
3
Press
ENTER
to enter
Menu
.
The system is set to Standby through System mode on the control unit. The system must always be set to
Standby before changing configuration.
1
Log in, if you already have not done so, see Chapter 9.1.
Go to the
System mode
menu using the arrow keys, and press
ENTER
.
2
Go to
Mode
, press
EDIT
and then press
ARROW DOWN
to
enter
Standby.
3
Press
ENTER
.
4
The whole system is now in
Standby
, press
ESC
.
1
Go to
System mode
and press
ENTER
.
2
Press
EDIT
and then
ARROW UP
to enter
Auto
.
3
Press
ENTER
.
The system starts up and is now on
Auto
. Press
ESC
once to
enter
Menu
.
9.2 Setting the system to Standby
9.3 Returning to Auto
ENTER
1
2
3
4
5
8
6
PASSWORD
7
0
9
