FläktGroup CAIRfricostar, Руководство по эксплуатации

Страница: 27 / 76

Mounting
CAIR
fricostar
®
FläktGroup DC-2009-0019-GB 2018-01/R9 • Specifications are subject to alteration without notice
27
5.1.5 Structure-borne sound attenuation
In order to reduce the transmission of vibration from the unit to the supporting structure,
provide vibration and noise-dampening pads.
– We recommend to use rubber pads to isolate the foundation from the units installed
on a level structure with no special requirements to structure-borne noise isolation.
– For a ceiling installation we recommend to use commercially available spring-based
elements.
– For very special acoustic requirements please consult an acoustic engineer to se-
lect the most suitable method for neutralising structure-borne noise.
5.2 Assembling the unit
Required tools: – Electric screwdriver, drill
– Bit holders/sockets
– Sockets of sizes 8, 10
– Slotted head screw bits, sizes 2, 3
– Open-ended spanners sizes 8, 13, 17
– Screw drivers 4.5 - 6.5
– Hexagon socket size 6
– Tensioning belts or suitable hoisting device
NOTICE!
See unit submittal documentation for details. Data sheets, installation instructions,
small parts and enclosed accessories are located in the unit section specified in
the parts list.
EQUIPMENT DAMAGE!
Do not mount or use field-supplied fittings and attachments on the unit panels or
frames, as these components can cause an air or water leakage. Ensure easy
access and service for the unit.