background image

Owner’s Manual  —  Phoenix 4800 E 

Industrial Desiccant Dehumidifier

Installation, Operation & Service Instructions

1

www.UsePhoenix.com • [email protected]

Toll-Free 1-800-533-7533

Read and Save These Instructions

Congratulations on your purchase of the Phoenix 4800E 

dehumidifier. This dehumidifier offers the finest in air-drying 

equipment. However, this machine can only provide maximum 

service and performance if properly installed, operated and 

maintained.
This owner’s manual is provided to acquaint you with the 

dehumidifier so that the installation, operation and maintenance 

can proceed successfully. Ultimate satisfaction depends on the 

quality of the installation and thorough understanding of the 

operation of this equipment. The dehumidifier is built around 

tested engineering principles and has passed a thorough 

inspection for quality of workmanship and function.

• 3032 pints/day AHAM

• 4800 CFM process airflow
• Dries in temperatures to 140ºF
• Reaches dew points as low as -40ºF

Specifications subject to change without notice.

TS-451d 06/11

4201 Lien Rd. • Madison, WI 53704

The Phoenix 4800 E

• 48”W x 120”L x 74”H
• 1600 lbs. (Standard 

machine weight only

)

• 480 volt 3-phase
• 106 full load amps

Phoenix 4800E  

(with Frame)
PN 4028003

Phoenix 4800E  

(without Frame)
PN 4029191

Содержание 4800 E














Отзывы: