FläktGroup CAIRfricostar, Руководство по эксплуатации, Страница: 29 / 76

Mounting
CAIR
fricostar
®
FläktGroup DC-2009-0019-GB 2018-01/R9 • Specifications are subject to alteration without notice
29
•
Disassemble the lifting lug secured on the base frame.
Fig. 5-7: Lifting lug secured on the base frame
5.2.2 Installation of individual modules
To join individual sections for final assembly (at joints) proceed as follows:
•
Attach provided gaskets at the joint (separate assembly in-
structions are enclosed with the supplied sealing strip).
•
Attention: CAIR fricostar Micro units with a split configuration
of model sizes 025 to 065 require adequate sealing of the
joint in the double plate heat exchanger during assembly.
Due to the increased condensate formation during dehumid-
ification mode provide adequate sealing of this zone to en-
sure a leak-free condition (see Fig. 5-16)!
Fig. 5-8: Installing individual modules
NOTICE!
Lifting lugs are not designed for suspending the unit from the top on a permanent
basis. It is allowed to use lifting lugs only once.
EQUIPMENT DAMAGE!
Do not attach tensioning belts/hoisting devices to heat exchanger connections,
condensate drains and door handles. Do not use thee components to pull or push
the equipment!