9. Fault finding
The following table contains
a matrix of possible faults
and solutions.
The SCBA set does not
turn on
The SCBA set turns off
or restarts
iPad app doesn’t respond
to button presses
Ensure that the battery is connected firmly and is fully charged (by
checking on charger or pushing the battery status button on the
Milwaukee battery).
Use a second battery to confirm.
Press the power button and confirm that it is depressed and that the
power light on this switch light comes on after ~5 seconds.
Ensure that the battery is fully charged
Ensure that the operating temperature does not exceed 30 degrees
Celsius / 85 degrees Fahrenheit.
Restart the app by double clicking the home button and swiping up. Re-
run the app from the home screen. Ensure that the hose reel and SCBA
are turned on.
Fault
Solution
31
