7. Running a scenario
This section highlights how to select and run a scenario from the ‘Select Scenario’ tab.
7.1 Select Training Mode
By default, single user mode is selected. When running FLAIM Trainer without a
second operator (FLAIM Trainer Duo) this mode should be left unchanged.
When depressed, the left button under ‘Select Training Mode’ cycles through
Single
User – Multi-User.
Single User is used for all scenarios where one operator is using the FLAIM Trainer
system. No further selections need to be changed as the user will use the nozzle by
default.
• Multi-user sets the primary operator to use the nozzle while the secondary user
defaults to the VIVE controller. Multi user launches the scenarios on both the
primary and secondary sets automatically.
By default and standard for Single User Mode is the nozzle/branch.
Figure 34:
Simulations Tab
Figure 35:
Select training mode
27
