14. FLAIM Trainer Duo Setup
The FLAIM Trainer Duo setup is identical to the single user system. Two units are
placed in the tracking area, side by side, and calibrated using the standing room setup.
As there are two users working in close proximity it is important that they stay within
their own safety zones (depicted as a blue circle on the floor) to ensure that they do
not collide with each other in the ‘real’ world.
One HDMI receiver collects the signals from both SCBA sets and an instructor can
choose which video feed to monitor using the ‘Select Master Set 1’ or ‘Select Slave Set
2’ in the Scenario Tab on the instructor iPad.
Both SCBA sets should be launched using their respective FLAIM Set 1 and FLAIM Set
2 buttons on the iPad.
Figure 45:
FLAIM Trainer Duo remote control for switching video sources
40
