FitSense FS-1, Руководство атлета

Страница: 9 / 33

4
VIEW FROM ABOVE TOE SIDE VIEW
Loosen your shoelaces.
Place the rungee cord
beneath 2 or 3 lace
crossings.
Snap the rungee
cord into the slot at
the front of the pod.
Tighten your laces
and tie your shoes
comfortably.
The foot pod should be
firmly attached with the
narrow end of the pod
facing your toe. If the pod
is loose, place the cord
beneath another lace
crossing.
The pod may remain attached to your shoe between activities. Also,
the cord may be laced into the shoe and remain there for convenience
and added security.
F
OOT
P
OD
B
UTTONS
The foot pod has three states (ON, OFF and COMM LEARN) that are controlled by
pressing the rubber button. Unique sounds confirm the state you have entered.
PRESSES WHAT THEY DO
ONE Turns pod ON. When the pod is off, push and hold the button until
you hear a beep. On button release, you will hear a single
confirmation beep. The pod is now ready for your activity. When
the foot pod is communicating with the watch, the foot icon on the
watch display will be lit.
TWO Turns pod OFF.
Pressing the button twice in quick succession turns
the pod off. A descending tone confirms that the foot pod is off.
THREE Allows a watch to learn a foot pod ID. Pressing the button three
times in quick succession resets the COMM Address. Three
beeps confirms that the foot pod is in COMM LEARN mode. Now
any FS-1 watch can learn the foot pod's ID. Once the watch
learns a foot pod's ID, the foot pod will return to normal operation.
LACE CROSSINGS