10
LINKING TO FITSENSE INTERACTIVE (USING
OPTIONAL NETLINK)
Keeping track of your activities on your PC and the Internet is easy. At the press of a
button, the details of your activity will link to the NetLink device. Here is a quick
reference guide for offloading your watch:
1. Plug your NetLink device into the serial port on
your PC.
2. Download and install your Netlink software (from
www.fitsense.com
) to your PC.
3. Enter
COMM
mode on the watch. Offloading will
begin automatically.
4. The blue light on the NetLink device will begin
blinking when the NetLink device connects to the
watch. When the PC begins communicating with
your watch, the blue light will stay on
continuously. If the light continues blinking, your
PC software may not be running.
5. Follow the on-screen instructions and software
manuals available at
www.fitsense.com
.
DISPLAYING HEART RATE ON YOUR FS-1
To see heart rate displayed on the watch:
1. Enter
SPED
mode.
2. Put on the heart rate monitor as
described above.
3. If the heart icon is not displayed, the
watch may need to learn the ID of
your heart rate monitor. Follow the
instructions in
Learning New
Sensors
on page 8.
4. While wearing the heart rate
monitor, press
SELECT
until you
see the heart outline icon in the
lower left quadrant of the watch
display.
5. Once your heart rate monitor has calculated your heart rate, it will display the
value in beats/minute in the lower left quadrant.
.:QUICK START
Содержание FS-1
Страница 1: ......
Страница 2: ......
Страница 4: ...WATCH FOOT POD NETLINK OPTIONAL ...
Страница 33: ...FitSense 212 Worcester Street Wellesley Hills MA 02481 1 800 419 3667 www fitsense com version1 1 2 08 01 ...