12
ASSEMBLY
Step 2
2A. Installing the Handlebars
Connect the
Hand Pulse Sensor Wires II (61)
from one of
Handlebar (52)
to the
Hand Pulse
Sensor Wires I (60)
on the left side of the
Upright Frame (46)
. As you’re connecting the pulse
wires, align and secure the
Handlebar (52)
onto one side of the
Upright Frame (46)
using two
Hex
Bolts (7)
, one
Hex Socket Bolt (64)
, and three
Curve Washers (63)
. Tighten the bolts with the
5 &
6 mm Allen Wrenches
provided. Repeat this step to attach the other
Handlebar (53)
onto the right
side of the
Upright Frame (46)
.
2B. Installing the Cup Holder
Attach the
Cup Holder (47)
onto the
Upright Frame (46)
using two
Cross Head Screws (48)
and
then tighten using the
Multi Hex tool with Phillips Screwdrive
r provided.
Hardware:
Tool:
5mm Allen Wrench 1 PC
6mm Allen Wrench 1 PC
(7) Hex Bolt
4 PCS
(64)Hex Socket Bolt
2 PCS
(63) Curve Washer
6 PCS
(48) Cross Head
Screw
2 PCS
Multi Hex Tool with Phillips
Screwdriver 1PC
Содержание 2050H.3
Страница 5: ...3 LABEL PLACEMENT ...
Страница 10: ...8 OVERVIEW DRAWING ...