19
MAINTENANCE & TROUBLESHOOTING
WARNING:
To prevent electrical shock, turn off and unplug the treadmill before cleaning or
performing routine maintenance.
CLEANING
The treadmill can be cleaned with a soft cloth and mild detergent. Do not use abrasives or solvents.
Be careful not get excessive moisture on the display panel as this might cause an electrical hazard
or electronics to fail.
Keep the treadmill, especially the console out of direct sunlight to prevent damage to the LCD
screen.
TROUBLESHOOTING GUIDE
1.
Apply silicone lubricant to
the running deck. See
Adjustments & Lubrication
2.
Adjust the belt tension. See
Adjustments & Lubrication
1.
Adjust belt tension. See
Adjustments
1.
Plug the Power Cord into an
electrical wall outlet.
2.
Ensure the Power Switch is
flipped to the ON position.
3.
Install the safety tether key
onto the Computer (57).
4.
Reset or have an electrician
replace the breaker in home.
5.
Wait five minutes and then
press the switch back on.
1.
Center the belt. See
Adjustments & Lubrication
Problem
Treadmill will not
start.
Belt slips.
Belt is off centered.
Potential Causes
1.
Not plugged in.
2.
Power Switch turned off
3.
Safety tether key not
connected.
4.
House circuit breaker
tripped.
5.
Treadmill circuit breaker
tripped.
Belt not tight enough.
1.
Not enough lubrication
applied onto the running
deck.
2.
Belt is too tight.
Running belt tension is not
even across the rear roller.
Corrections
Belt hesitates
When stepped
on.
Содержание 2050H.3
Страница 5: ...3 LABEL PLACEMENT ...
Страница 10: ...8 OVERVIEW DRAWING ...
