11
to be moved from FORWARD view to DOWN view
–
but does easily rotate on the hinge
bolts.
5.
If mounting
dual transducers
, mount the Livescope to the side and the GT series to the
bottom of the downrod using the transom mount assembly as the Livescope photo
shows on the previous page.
6.
See handle assemblies information
(on last page) for further relevant information.
Garmin Perspective Mounting System:
If you have purchased the add on kit for Perspective view for the Livescope system, the
following bracket is included allow the user to move the transducer between the three view
modes:
Step 1
Install the ball onto the transducer,
install
tightly and use the internal tooth
lockwasher
between the ball stud and the
transducer.
Step 2
Ensure there is about 9.5 inches of cable from the edge of the
mounting disk to the transducer
Step 3
Install the disk end ball to the downrod end using the screws provided.
The RAM logo should be centered over the wire channel.
Step 4
Connect the center arm to the two balls.