Fisher PRO-CASTER 0806, Руководство по установке

Страница: 7 / 16

Lit. No. 96210/96211, Rev. 00 5 June 15, 2008
SPREADER MOUNTING INSTRUCTIONS
Mounting the Spreader onto the Vehicle
NOTE: Periodically through the snow season,
verify the mounting devices are secure.
1. Remove the tailgate from the truck.
2. Lift the spreader. See appropriate instructions
below.
Regular Capacity: Lift spreader by hooking the loop
located on rear cross channel inside hopper.
NOTE: The loop is located at the approximate
balance point of the spreader. The balance point
may vary with engine
fl uid levels, battery, top
screen, or residual material in hopper.
CAUTION
Before lifting, verify hopper is empty of
material. The lifting device must be able to
support the spreader's weight.
High Capacity: Lift spreader by hooking all four loops
located at the corners of the hopper.
Lifting Loop
Loops