Fisher FSAIF-Pro-123AE2 Скачать руководство пользователя страница 49

Страница: 49 / 69

8.4.12 Compatible with new controller RG52I

Through RG52I controller, five function parameters of air conditioners can

be adjusted immediately. There is no need to change the chip anymore.

1, Auto restart function

Press “ADJUST” button, choose “F1”. Press “MODIFY” button, Press

“ADJUST” .Then choose “ON” or “OFF” button to active the auto restart function

or shut off the function. Press “CONFIRM” button at last.

2, Temp. compensation.

Press “ADJUST” button, choose “F2”. Press “MODIFY” button, Press “ADJUST”

to choose the temp. value(

0~6)

. Press “CONFIRM” button at last.

3, Anti-cold wind function

Press “ADJUST” button, choose “F3”. Press “MODIFY” button, Press “ADJUST”

to choose “1” or “2”. Press “CONFIRM” button at last.

“1” : intelligent defrosting mode.

“2” :common defrosting mode.

4, Indoor fan speed of when setting temp. is achieved.

Press “ADJUST” button, choose “F4”. Press “MODIFY” button, Press “ADJUST”

to choose “1” or “2” or “3”. Press “CONFIRM” button at last.

“1”: Indoor fan stops when setting temp. is achieved.

“2”: Indoor fan keeps at lowest fan speed when setting temp. is achieved.

“3”: Indoor fan keeps at setting fan speed when setting temp. is achieved.

5, Louver position memory function

Press “ADJUST” button, choose “F5”. Press “MODIFY” button, Press “ADJUST”

to choose “1” or “2” or “3”. Press “CONFIRM” button at last.

“1”: Louver position is not memorized.

“2”: Louver position is active, even when power off and AC shuts off.

“3”: Louver position is active, even when AC shuts off, while Inactive when power

off.

Содержание FSAIF-Pro-123AE2






































































Результаты поиска

Содержание FSAIF-Pro-123AE2

Отзывы:

Бренды по названию

Популярные бренды

Fisher FSAIF-Pro-123AE2, Руководство по обслуживанию

Результаты поиска

Содержание FSAIF-Pro-123AE2

Отзывы:

Бренды по названию

Популярные бренды