Fisher Scientific Isotemp 500 Series, Инструкция по эксплуатации

Страница: 4 / 24

Page 1 Isotemp Economy Incubators
Introduction
Fisher Isotemp 500 Series Economy Incubators are available in three
sizes: small (Model 525D), medium (Model 537D) and large (Model
550D). All models provide analog, on/off control at operating
temperatures ranging from 30
°
C (86
°
F) to 75
°
C (167
°
F).
Inlet air enters through a port located under the incubator floor. Heat
generated convection then gently moves the air in a vertical circulation
pattern. Exhaust air is vented through a port at the incubator top.
The Model 525D accommodates a maximum of five shelves. The Model
537D holds eight shelves, while the 550D holds up to eleven.
Isotemp incubators incorporate a variety of safety features. A safety
backup is built into the controller: if the primary heater control fails, the
Backup will maintain control at 3
°
C above the set point. An alarm LED
Then indicates that the backup controller is operating the incubator. A
circuit breaker protects the incubator from power surges.
The glass door is designed to meet specification without a door gasket to
provide maximum viewing of the interior.