Fisher Scientific Isotemp 500 Series, Инструкция по эксплуатации

Страница: 15 / 24

Page 11 Isotemp Economy Incubators
Accessing the
To access the electronics compartment, proceed as follows:
Electronics
Compartment
1. Disconnect power cord from the electrical outlet.
Caution: Allow incubator to cool to ambient temperature
before attempting repair.
Caution: Service procedures requiring access to the
electronics compartment involve exposure to line
voltage and should be done by qualifled service
personnel. Disconnect incubator from power before
attempting repairs.
2. Remove two screws from top of incubator securing bezel to cover.
3. Grasp bezel and pull top outward. The bezel bottom will disengage
from the fascia.
4. Rotate bezel upward an lay face back on top of incubator.
Bezel screws on top
Heater Cover