Fisher Scientific Isotemp 100L Incbtr Grvity 120V, Руководство пользователя

Страница: 28 / 86

3URGXFW'HVFULSWLRQ
'DWD&RPPXQLFDWLRQV $ODUP,QWHUIDFH
*UDYLW\&RQYHFWLRQDQG)RUFHG$LU,QFXEDWRUV )LVKHU6FLHQWLILF
'DWD&RPPXQLFDWLRQV $ODUP,QWHUIDFH
All signal connections are installed in the electrical interface panel at the rear of the incubator.
56,QWHUIDFH
The RS- 232 interface (item 2 in figure 5 below) may be used to connect Fisher Scientific
incubators to the serial interface port of a computer to allow for the computer-aided
acquisition and documentation of major operating parameters (temperature, error codes, etc.).
)LJXUH6LJQDO,QWHUIDFHVDQG3RZHU6RFNHW
[1] Not used
[2] RS 232 interface
[3] Not used
[4] Power socket
[5] not used
$&3RZHU6RFNHW
The incubator is connected to the AC supply mains via the socket (item 4 in figure 5 ), which
accepts a power cord with an IEC standard plug.
)XVHV
Two 16 A slow-blow fuses mounted on the incubator’s main electronic circuit board protect
internal circuitry from the impact of excessive power consumption.
5HSODFHPHQWVKRXOGRQO\EHFDUULHGRXWE\VNLOOHGDQGDXWKRUL]HG
TXDOLILHGSHUVRQQHORIHOHFWURWHFKQRORJ\VLJQDOHQJLQHHULQJ