Fisher Scientific Isotemp 100L Incbtr Grvity 120V, Руководство пользователя

Страница: 65 / 86

0DLQWHQDQFH
&RPSDULVRQ0HDVXUHPHQW3URFHGXUH
)LVKHU6FLHQWLILF *UDYLW\&RQYHFWLRQDQG)RUFHG$LU,QFXEDWRUV
To minimize temperature variations during the measurement, put the measuring sensor in an
isothermal container (such as a bowl filled with glycerol) before placing it in the work space.
Use the center of the work space as the reference location for the comparison measurement.
,VRWKHUPDOFRQWDLQHU
'RQRWXVHDFRQWDLQHUILOOHGZLWKZDWHUDVDQLVRWKHUPDO
FRQWDLQHUEHFDXVHWKHHYDSRUDWLRQRIZDWHUZLOOUHVXOWLQDORZHU
WHPSHUDWXUHUHDGLQJ
([FHVVLYHZRUNVSDFHWHPSHUDWXUHV
([FHVVLYHZRUNVSDFHWHPSHUDWXUHVDIWHUWKHFDOLEUDWLRQPD\EH
UHGXFHGE\OHDYLQJWKHGRRUVRSHQIRUDSSUR[VHFRQGV
&RPSDULVRQ0HDVXUHPHQW3URFHGXUH
1. Turn the incubator on using the power switch.
2. Set the temperature set value and allow the incubator to stabilize. This may take several
hours.
3. Place the measuring device in the center area of the work space. Alternatively, a
temperature sensor may be positioned in this location. Route the connecting cable
between the glass panel and the interior tank.
4. Close the doors.
5. Wait until the temperature value displayed on the measuring instrument has stabilized.
6. Use the temperature reading from the measuring device to calibrate temperature control
manually, as explained “Entering the Calibration Reference Temperature Manually” on
page 7-10 .
7HPSHUDWXUH&DOLEUDWLRQ3URFHGXUH
For detailed instructions on how to perform a manual temperature calibration, please refer to
the instructions in the section
“Calibration” on page 7-10 .
([FHVVLYHZRUNVSDFHWHPSHUDWXUH
([FHVVLYHZRUNVSDFHWHPSHUDWXUHVDIWHUWKHFDOLEUDWLRQFDQEH
UHGXFHGE\OHDYLQJWKHGRRUVRSHQIRUDSSUR[VHFRQGV