Lit. No. 49591, Rev. 05
10
July 15, 2020
27775, 28069, 57000, 57000‑1, 57000‑3
With the snowplow attached to a properly ballasted
vehicle, make one of the following adjustments:
If there is not enough slack in the lift chain,
there will be difficulty getting the connecting pins
to engage the vehicle pushplates while pushing
back on the headgear. Adjust the connecting link
up
one link from the factory setting.
If there is too much slack in the lift chain,
adjust the connecting link
down
one link from the
factory setting.
Moving the connecting link more than one chain link
higher or lower than the factory installed location is
not recommended.
Lift Chain (DS)
Center U‑Bolt
Spring
Connecting
Link
Driver‑Side
U‑Bolt
Link #1
