Fisher & Paykel WM1490P2 Скачать руководство пользователя страница 36

Страница: 36 / 48

TROUBLESHOOTING

The following is a list of problems you may encounter when using this appliance and some
suggestions that may help to correct the problem. If you still have problems, contact your
Fisher & Paykel trained and supported service technician.

PROBLEM

POSSIBLE CAUSES

WHAT TO DO

Washer not

turning on

Power not switched on at
the wall.

Switch the power on at the wall.
Press

POWER

Household power supply
not working.

Try plugging in another
electrical appliance.

Pressing

does not start

the fill

Keylock may be activated.

Press and hold for three seconds.

Washer door not
closed properly.

Open and reclose door.

The washer has detected a fault.

Check if a code is being displayed
on the control panel, refer to
‘Fault codes’.

Hot and cold taps not
turned on.

Check that both hot and cold taps
are turned on (if using cold inlet only
ensure inlet valve cap is installed on
the hot valve on the washer).

Hot and cold taps not
connected to the corresponding
valve on the washer.

Check the cold tap is connected to the
cold valve on the washer and the hot
tap is connected to the hot valve.

Blocked hose filters.

Check the tap end of the inlet hose(s)
for blockages.

Inlet hose(s) leaking, twisted
or damaged.

Check the inlet hose(s) for leaks or
damage. Check that the inlet hose(s)
are not twisted.

Faulty water supply.

Check tap(s) that aren’t connected
to the washer are working.

Delay start maybe set.

Refer to ‘Delay Start’.

Washer stops

working

mid cycle

The washer has detected a fault.

Refer to ‘User warnings’ or
‘Fault codes’.

Power or water failure.

Check the power and/or water is
working correctly.

Washer has been paused.

Press to continue.

Oversudsing.

Washer is waiting for suds to dissolve
before continuing the cycle.

Washer drains

while filling

Drain hose too low.

Ensure the height of the drain hose is
at least 600mm from the floor level,
refer to your installation guide.

Drain hose sitting in water.

Clear the drain.

Содержание WM1490P2

















































Результаты поиска

Содержание WM1490P2

Отзывы:

Похожие инструкции для WM1490P2

Бренды по названию

Популярные бренды

Fisher & Paykel WM1490P2, Руководство пользователя

Результаты поиска

Содержание WM1490P2

Отзывы:

Похожие инструкции для WM1490P2

Бренды по названию

Популярные бренды