23
CUSTOMISING A WASH CYCLE
Optimise Wash
Your washer offers two optimise wash modes –
ECO
and
SPEED
– allowing you to save water
and energy or save time. For clothes care reasons not all options are available on all cycles.
Eco
Use
ECO
mode to save water and energy. Selecting
ECO
will reduce the wash temperature
slightly and alter the wash and rinse programming.
z
SPEED
and
ECO
cannot be selected together.
z
ECO
will not be available if
PRE WASH
or
RINSE+
have been selected.
Speed
A special feature designed to offer a shorter cycle whilst maintaining wash performance.
This mode can be selected on
COTTONS
,
SYNTHETIC, 20
°
C
and
QUICK
cycles. A number of
factors can influence the amount of time saved on a cycle, including the load size, cycle
chosen, water flow rate and load distribution during spin.
Pre Wash
Your washer will start with a short wash in cool water to remove excess soil. The washer
will drain and then fill at the selected temperature for the main wash.
PRE WASH
cannot
be selected after a wash cycle has been started or if
ECO
has been selected. Use liquid or
powdered detergent in the
PRE WASH
compartment. The compartment is flushed at the start
of the cycle.
Rinse+
If you have a particularly dirty load, or you have sensitive skin and wish to give your clothes
an extra rinse, select
RINSE+
from the
WASH BOOST
options. Your load will undergo an extra
rinse to get rid of any residual detergent or soil in the items.
RINSE+
will not be available if the
ECO
option has been selected.
Wash+
WASH+
allows you to increase the wash time for heavy soiled items. The increase in wash
time gives the load the right amount of tumbling to remove the soil from items that might
need it.
Options
Wrinkle Free
We recommend you remove the clothes from the washer immediately after the completion
of the cycle to minimise wrinkling and creasing of items and to prevent dye run. However, if
you will not be present at the end of the wash you can select
WRINKLE FREE.
When
WRINKLE FREE
is selected, the washer will tumble the clothes once every 15 minutes
for up to 12 hours after the cycle has finished. The
WRINKLE FREE
light and
button will
flash, and the washer will beep at regular intervals to remind you to remove your load. To
remove the load during this phase, simply press the
button.