Fisher & Paykel RB36S25MKIW, Руководство по обслуживанию

Страница: 72 / 77

840653
72
12.5 Block/Edge Connectors
There are three types of connectors used with the CoolDrawer. Some of the terminals are available as a
spare part. The others are the small pins of the cabinet module which we feel will be difficult to replace in
the field, therefore we have made available the wiring harness with these plugs and sockets on them.
Should a connector need replacement, it is important that the wiring connections be kept in the correct order
to the connector. The wiring harness uses one colour of wire throughout all circuits. The circuit wiring
should be traced with the aid of a multimeter before a connection is made.
To make a connection on a female block connector, cut the wire end square and insert it into the correct
location on the block connector itself. With the wire fully inserted, apply pressure to the terminal, which will
lock the wire and terminal together.
If possible, when replacing a connector the connections should be made one at a time. For example, first
cut the wire in pin 1 of the old connector and insert it into pin 1 on of the new connector. Push the pin fully
home to lock the wire in place, and then move on to pin 2.
Note that the connectors contain a wall between the cavities to ‘code’ or polarize the connector. This is
especially important in the case of the 4 and 6 way connectors in the power/control module. Also note that
the replacement connectors are un-coded (to reduce the number of spare parts required) and therefore care
must be taken that the connector is refitted to the correct socket. Check the wiring diagram and labelling on
the power/control module if unsure.
When wiring any DC voltage supply or components, it is important that the correct polarity be observed.
The following diagrams show all these connectors and their Fisher & Paykel part numbers.
881595 MOLEX SKT 16-22AWG 50597-8100 (16 – 22AWG wire)
881596 MOLEX SKT 20-26AWG 50598-8100 (20 – 26AWG wire)
881597 MOLEX PIN 16-22AWG 50599-8100 (16 – 22AWG wire)
881598 MOLEX PIN 20-26AWG 50600-8100 (20 – 26AWG wire)
881592 MOLEX CAP FEMALE 51139-0200