Fisher & Paykel RB36S25MKIW, Руководство по обслуживанию

Страница: 42 / 77

840653
42
Display Code: 15
Condenser Fan Not Off.
Reason:
Condenser fan fault. The condenser fan is still rotating. Either the fan or the
power/control module is faulty.
Action:
Check the condenser fan wiring, connections and fan function. If OK, replace the
power/control module. If still faulty, replace the display module.
Display Code: 16
Condenser Fan Not On.
Reason:
Condenser fan fault. The condenser fan is rotating less than expected. Either the
wiring is open circuit or the fan is faulty.
Action:
Check the condenser fan wiring, connections and fan function. If OK, replace the
power/control module. If still faulty, replace the display module.
Display Code: 17
Evaporator Fan Not Off.
Reason:
Evaporator fan fault. The evaporator fan is still rotating. Either the fan is faulty or the
power/control module is faulty.
Action:
Check the evaporator fan wiring, connections and fan function. If OK, replace the
power/control module. If still faulty, replace the display module.
Display Code: 18
Evaporator Fan Not On.
Reason:
Evaporator fan is fault. The evaporator fan is rotating less than expected. Either the
wiring is open circuit or the fan is faulty.
Action:
Check the evaporator fan wiring, connections and fan function. If OK, replace the
power/control module. If still faulty, replace the display module.
Display Code: 105
Communications Fault.
Reason:
There is a communications fault between the cabinet module, the display module/user
interface and the power/control module. It could be in any of the modules or in the
wiring harness.
Action:
1. Replace the display module/user interface. Wait 30 seconds after re-applying
power, then retest. If fault still exists:
2. Refit original display module/user interface. Check continuity of harness between
the display module/user interface and the cabinet module. If faulty, replace. If fault
still exists:
3. Replace the cabinet module. Wait 30 seconds after re-applying power, then retest.
If fault still exists:
4. Refit original cabinet module. Replace the power/control module.
10.1.3
Diagnostic Mode
The CoolDrawer is fitted with a diagnostic system to help the service technician in testing the drawer and
obtaining information that will assist in locating the fault.
1 2
To Enter Diagnostic Mode:
•
Open the drawer.
•
Press the
LOCK
button for 3 seconds to unlock the control panel.
•
Within 15 seconds, press and hold the
LOCK
button, then within 1 second press the
FUNCTION
SELECT
button. Hold for 3 seconds. This shows the compartment temperature.
The
WARMER
or
COLDER
button can now be used to scroll through the diagnostic menu.
Having entered diagnostic mode, the compartment temperature is displayed.
•
Press the
COLDER
button once. The data download mode is entered.