Fisher & Paykel AeroCare DE7027G1, Инструкция по установке и руководство пользователя

Страница: 75 / 92

73
Changing pre-set options
Changing pre-set options
Option Adjustment mode
In this mode you can modify the number of beeps that sound at the end of the cycle (ie end of
cycle (EOC) beeps), and reset the dryer to the settings it left the factory with (factory reset).
Note: DRYNESS LEVEL and DRYING TEMP settings cannot be modified.
To enter Option Adjustment mode
1
Turn the machine on at the wall but do not touch the POWER button.
Touch and hold the
KEYLOCK and START/PAUSE buttons for three seconds . You will hear three quick beeps
indicating you have entered Option Adjustment mode. The diagram below shows how the drying
cycle icons relate to the options you can change. Page 74 explains the options in more detail.
2
Use the dial and buttons on the control panel to make your changes to the pre-set options.
3
Touch POWER to return to normal mode when you have finished modifying your options. Your
dryer will automatically remember your changes.
Adjusting your options
1
Enter the Option Adjustment mode (refer above).
2
The diagram below shows how the drying cycle icons relate to the options you can change.
The two options (the number of end of cycle beeps, and resetting the factory defaults) you can
adjust are accessible using the HEAVY and DELICATE cycles.
3
Use the MORE (and where available) LESS buttons underneath the digital display to scroll
through the available settings of your selected option.
Fig.55 Option Adjustment mode