© Copyright 2001-2021 fischertechnik GmbH | Klaus-Fischer-Straße 1 | 72178 Waldachtal
04
ROBOTICS
TXT 4.0 CONTROLLER
fischertechnik TXT Operating manual_EN | 10. November 2021, 9:18 PM
SAFETY INFORMATION
›
Inspect the charger regularly for damage.
›
In case of damage, the charger may not be used until repairs are completed.
›
Do not insert the wires into an outlet!
›
Non-rechargeable batteries cannot be charged!
›
Remove rechargeable batteries from the battery compartment before charging.
›
Only charge rechargeable batteries with adult supervision.
›
Insert batteries with the correct polarity.
›
Connection terminals may not be short circuited.
›
The ROBOTICS TXT 4.0 Controller may only be operated with a fischertechnik power supply, such as the Battery
Pack 35537 or Power Supply 9V DC, 2.3-2.5A.
›
When connecting the Battery Pack to the Controller, observe the following:
›
Connect the plus pole of the “9V IN” connection to the plus pole (+) of the Battery Pack.
›
Connect the minus pole of the “9V IN” connection to the minus pole (-) of the Battery Pack.
›
The maximum operating temperature is 40°C.
›
Do not allow sharp or pointed objects to come into contact with the touch display, as this may cause damage!
INTENDED USE
The Controller may only be used to operate and control fischertechnik models.
