The Panda Generator
Page 20 Panda PMS AGT-DC 10000 - Chapter A: The Panda Generator
Electrical connections for control
At the front of the generator also all
remaining cables for the electrical con-
nections are depending upon type. The
allocation of the connections result from
the plan for the AC-Control box. See
here:
1. Fuel pump
2. Remote control panel
3. VCS
4. Measuring shunt
5. Measuring voltage 24V
Fig. A.35: Electrical connections
Starter motor
1. Starter motor and
2. Solenoid switch
The Diesel engine is electrically started.
On the back of the engine is accordingly
the electrical starter with the solenoid
switch.
Fig. A.36: Starter motor
Actuator for speed regulation
The generator voltage is determined by
progressive speed control through "VCS"
in conjunction with the speed actuator.
Speed increases with increasing load.
Fig. A.37: Actuator
4
3
1
2
5
1
2
