The Panda Generator
Panda PMS AGT-DC 10000 - Chapter A: The Panda Generator Page 17
Cooling air for coil cooling
The sound cover upper surface is provi-
ded at back side with drillings, through
which the cooling air can influx.
It must be consistently paid attention that
the generator is installed in such a way
that from no water can arrive into the pro-
ximity of these air openings.
Fig. A.26: Cooling ait intake
Air suction housing
Remove the cover to look indes the hou-
sing. There is a filter element. This must
be checked from timt to time.
Fig. A.27: Air suction housing
Air suction housing with air filter set
The figure shows the air filter element in
the air suction housing. However the
return pipe of the crank case exhaust
flows also into the air suction housing, it
can be faced with older generators and/or
with engines on high running time that oel
vapors affect the air filter. Therefore an
check is advisable once in a while.
Fig. A.28: Air filter
