The Panda Generator
Page 18 Panda PMS AGT-DC 10000 - Chapter A: The Panda Generator
Induction elbow
The figure shows the induction elbow at
the combustion engine. At the front of this
induction elbow you can see the hose
connection between air suction housings
and induction elbow. The air filter must be
checked, if this hose pulls together at
operation.
Fig. A.29: Induction elbow
Exhaust elbow
On the back of the engine is the water-
cooled exhaust elbow. On the top side the
pipe union for the internal seawater circuit
is to be seen and the filler neck for the
cooling water. This cooling water filler
neck is used only at first filling. Control of
the cooling water and if necessary refill
takes place at the external cooling water
expansion tank.
Fig. A.30: Water-cooled exhaust elbow
Exhaust connection at the exhaust
elbow
Seawater from the external cooling circle
is fed here.
Fig. A.31: Exhaust port
