Fischer Panda 15000i PMS, Руководство пользователя

Страница: 128 / 176

Inverter Panda PMGi
4.5.16 Kapitel/Chapter 10: Inverter Panda PMGi - Seite/Page 128
10.11.2.3 Connection to a system with isolation control at PMGi with PEN jumper
For the use of the PMGi with an isolation controlled grid, the external PE-N Bridge must be disconnected. PEN
jumper open.
10.11.2.4 Connection to a system with isolation control at PMGi without PEN jumper
For the use of the PMGi with an isolation controlled grid, the internal PE-N Bridge must be disconnected.
A manual for this modification can be downloaded under:
http://www.fischerpanda.de/images/gensets/M_AC_50_INV_PMS_8000i/operatormanual/PMGi/
Modification_PMGi_isolation_control.eng.pdf
10.12Technical Data
10.12.1 General Data
PMGi is part of the Panda i-series generator. Its not allowed to be used with other generators or applications.
10.12.2 Generator Specification
Storage temperature PMGi -20 °C to +55 °C
Working temperature PMGi Minimum: -20 °C
Maximum: +40 °C
Maximal internal temperature of the PMGi:
+60 °C
PMG Generator out 3 phase
Voltage Phase minimum 250 V AC Maximum 550 V AC
Frequency minimum 250 Hz Maximum 650 Hz