Assembly instructions Rev6.0
14
This document is the property of Fischer Connectors.
This document must not be reproduced or distributed, in whole or in part, without prior written permission of Fischer Connectors.
Picture
Process
Tools
Slide the Shrink Tube “F” over the
Crimping Sleeve ”E” and heat it.
Heat gun
Shrink tube operating
temperature Range : -
55°C to 110°C.
Polishing: See section 8
Insert all the termini “C” into the
insulator “B”.
When you insert the terminus
”C”, be careful to turn it during
the insertion to not “bend” the
contact O-ring.
Pin Layout front view.
Place the Support Washer “D”
around the termini ”C”.
Push the contact bloc (termini
“C” + insulator “B”) with the
Support Washer”.
Insert the Wire Set Body “H” into
the Connector Body “A”.
Receptacle
