Assembly instructions Rev6.0
10
This document is the property of Fischer Connectors.
This document must not be reproduced or distributed, in whole or in part, without prior written permission of Fischer Connectors.
Screw by hand the Rear Nut “H”
on the Connector Body “B”.
Screw the Rear Nut "G".
Recommended torque : 5.0 Nm
Torque wrench [5Nm]
Size 13
Counter piece:
receptacle FO2/4
Slide the Shrink Tube "I" until the
end of the shrink tube bottoms
against the Potting Set Body “G”
as shown on the left picture and
heat it.
Heat gun
Shrink tube operating
temperature Range : -
55°C to 110°C..
