FirstCall Out and About, Руководство пользователя

Страница: 15 / 20

The pendant can send a text message to the first 3 Contacts if it is taken outside a defined
area. The area is circular and the radius can be set between 10 metres and 2.5 kilometers in 10
metre increments. In prac�ce there will be a small varia�on in the distance due to GPS errors.
First check that the pendant is switched on and has an accurate GPS posi�on. You can do this
by reques�ng the pendants loca�on as shown on the previous page.
To set the movement alarm - Send the pendant the following text message. Follow the format
exactly - it is case sensi�ve. Include the comma.
To set the movement alarm, send: xxxxxxP1,yyy
xxxxxx is the six-digit order number on the rear of this manual.
yyy is a the distance limit between 1-255. Each unit represents 10 metres.
For instance, a se�ng of 050 would be 500 metres.
If successful the pendant will send - Set GEO Alarm ok!
If the text format is incorrect the pendant will reply “invalid informa�on”.
To disable the movement alarm, send: xxxxxxP0
xxxxxx is the six-digit order number on the rear of this manual. 0 is the number zero
If successful the pendant will send - Cancel GEO Alarm ok!
If the text format is incorrect the pendant will reply “invalid informa�on”.
It is also possible to set a rectangular or irregular area by sending the pendant GPS coordinates,
but this is complex and out of the scope of this manual. Please contact FirstCall for more
informa�on.
14
Se�ng the Wandering Alarm