First Degree Fitness Vortex VX3 FA, Руководство пользователя

Страница: 25 / 29

25
Troubleshooting
Problem Solution
The water tank appears cloudy or tank
water has changed colour.
Check to see that your unit has not been positioned in direct
sunlight as this can impact the water quality.
Your tank requires a water treatment every 12-24 months.
To treat the water, refer to the section in this manual called
“Long-Term Water Treatment” on page 16.
The rower belt is slipping off the belt/
bungee pulley.
It is likely your bungee is not under enough tension or the
recoil is not strong enough.
To fix this refer to our website firstdegreefiness.zendesk.com
under Product FAQs.
Rowing stroke return is too light There are 3 probable causes:
a) Bungee not under enough tension.
To fix cut Bungee Tie Rack and tighten slightly on Bungee
Hook.
b) Rowing Belt is missing one wrap around rower Belt
Pulley.
To fix wrap the Rowing Belt one extra turn on the Belt
Pulley as shown below.
c) Bungee has slipped off the Bungee Pulley Wheel.
To fix ensure that the Bungee Cord is positioned as
shown below.
The computer screen is erratic and
illuminates, but does not register
when rowing.
It is possible that there is a loose connection. Check that
the computer lead is connected properly to the Rower. If
connected properly check sensor gap. Contact your local
dealer if this fails to address
the problem.
The computer does not illuminate after
battery installation.
Re-install batteries in correct position and try again. If the
LCD screen fails to illuminate, try rotating the batteries
slightly in the computer. If this fails, contact your local
dealer.
For further information, manuals and warranty requests visit
www.firstdegreefitness.com/support
Shock Cord Joiner
Condition 2: No return
Solution: Wrap one
extra turn
Correct cord position
Incorrect: Belt return will be slow
and damage to cord will result