First Degree Fitness Vortex VX3 FA, Руководство пользователя

Страница: 11 / 29

11
Assembly
STEP 3
Assemble Rower Seat
a) Install the rower seat[3] onto the rower frame using 4 x
M6x20mm bolts[9] and 4 x M6 washers[6] the seat
indentation must be facing towards the rear of machine.
9
3
6
b) Slide the assembled seat rails 2 facing in the direction of
the arrow in the above graphic. The seat indentation must
be towards the rear of the rower.
4x M6x20mm bolts
and 4x M6 washers
Rower Seat
Rower Seat Frame
Indentation
REQUIRED
Rower Seat [3]
4 x M6 x 20mm Bolts [9]
4 x M6 Washers [6]
Indentation
Note: The seat assembly bolts (4 x M6 x 20mm) are pre-installed on the
rower seat.
Note: Finished rower seat must be mounted exactly as shown, resembling
shape of the letter ‘Z’.
CAUTION
The Rower Seat[3] is
heavy. Use both hands
and keep fingers clear of
the rower channels when
guiding the seat down the
seat rails.