First Degree Fitness Vortex VX3 FA, Руководство пользователя

Страница: 21 / 29

21
Integrated Performance Monitor (IPM) Operation
5. The display will animate while waiting for a Smart
Handle Pairing Signal
6. On the Smart Handle press and hold both
buttons to complete the pairing process
7. On success the display will show ‘dOnE
8. Press any key to return to main display
9. On failure, if there is no Smart Handle signal
after 20 seconds, the display will show ‘Err’
with an error number (See the Troubleshooting
Section for further information)
10. Press any key to return to main display
11. Repeat from #1 assigning a different Fluid
Assist ® ID for each VX-3 FA
PAIRING YOUR SMART HANDLE WITH YOUR IPM
NOTE: PAIRING IS ONLY REQUIRED WHEN THERE IS MORE
THAN ONE VX-3 FA IN THE SAME LOCATION.
Where there are multiple VX-3 FA machines in one location,
each fluid rower needs to be assigned a different Fluid As-
sist ® ID to avoid cross talk. It is suggested that the assigned
IDs range from 1 to n, where n is the number of VX-3 FAs,
beginning the pairing process at 1 then repeating for each
additional VX-3 FA.
1. Preset RESET to clear the monitor
2. Press and hold UNITS and LEVEL
UP for 5 seconds
3. Use + or – (above & below SET) to
change the Fluid Assist ® ID
displayed in the Distance field
4. Press SET to initiate pairing, or
any other button to cancel and
return to main display screen