manualshive.com logo in svg

First Alert FA148CP Series, Инструкция по установке и настройке

Поделиться
Скачать
First Alert FA148CP Series Скачать руководство пользователя страница 70

Keypad Functions 

The following is a brief list of system commands. For detailed information concerning system 

functions, refer to the User's Manual. For AUI users, refer to the separate AUI User’s Guide. 

 

Voice Keypads 
The FA560VKP Voice Keypad provides the following features: 

•

  Message Center, which lets the user record and playback one message. 

•

  Voice Status, which can announce system status by using the STATUS key. 

•

  Voice Chime, which can alert users to the opening of doors/windows while the system is disarmed. 

Refer to the User Guide for specific procedures for activating and using these features. 

 

Keypad Commands 

Function Description 

Silence alarms 

Pressing any key will silence the keypad sounder for 10 seconds. Disarming the 
system will silence both keypad and external sounders. 

Quick Arm 

If enabled (field 

∗

21), you can press [#] in place of the system's security code, plus the 

desired arming key (Away, Stay, Instant, Maximum) 

Single-Button arming 

If programmed (*57 Function Key menu mode), lettered keys A-D can be used for 
arming, using options 3-AWAY, 4-STAY, 5-NIGHT-STAY, or 6-Step-Arming 
If used, no security code is required to arm the system. 

Alarm Memory 

When the system is disarmed, any zones that were in an alarm condition during the 
armed period will be displayed. To clear this display, simply repeat the disarm 
sequence (enter the security code and press the OFF key) again. 

Arming Away 

Enter code + AWAY [2] or simply press appropriate lettered key on the keypads (see 
“Single-Button Arming” above). If the “Auto-Stay Arm” feature is enabled (field *84) 
and the entry/exit door is not opened and closed within the programmed exit delay 
time, the system will automatically arm in STAY mode if armed from a wired keypad 
(non-RF device). If the door is opened and closed within the exit delay period, the 
system arms in AWAY mode. 

Arming Stay 

Enter code + STAY [3] or simply press appropriate key on the keypads (see “Single-
Button Arming” above). See “Arming Away” above for Auto-Stay arming feature. 

Arming Night-Stay 

Enter code + STAY [3] + STAY [3] or simply press appropriate key on the keypads (see 
“Single-Button Arming” above). 

Arming Instant  

Enter code + INSTANT [7]. 

Arming Maximum 

Enter code + MAXIMUM [4] or simply press appropriate lettered key on the keypads 
(see “Single-Button Arming” above). 

Disarming 

Enter code + OFF [1].

 If entry delay or an alarm is active, you do not need to 

press OFF.

 

Bypassing Zones 

Enter code + BYPASS [6] + zone number(s). 

Forced (Quick) Bypass 

To automatically bypass all faulted zones, use the “Quick Bypass” method. Enter code 
+  [#], then wait for all open zones to be displayed. Arm when display 
indicates “ZONE BYPASSED” and “READY TO ARM”. 

Chime Mode  

Enter code + CHIME [9]. To turn chime off, enter code + CHIME again. 

Activate Output Devices  If relay outputs (via a 4204, or 4229), or Powerline Carrier devices are used, two 

keypad entries available to the user are included. If programmed, these entries can be 
used to manually activate or deactivate the device(s) for starting or stopping some 
action, such as turning lights on or off, etc.  These keypad entries are: 
[Security Code] + # + 7 + [2-digit Device #] activates (starts) that device. 
[Security Code] + # + 8 + [2-digit Device #] deactivates (stops) that device. 

 

 

Installation Instructions 

 

12-2

 

Содержание FA148CP Series

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды