© 2021 Carrier
11
13.
ORDERING INFORMATION
Before ordering, please provide the data as in Appendix 3
.
The Table 1 below shows examples of the Part Numbers
of length “L” every 0.5 meter and the fuel options of
Natural Gas or Propane Gas/LPG in typical capacity ranges as in Appendix 1.
Pilots can be ordered in size increments of 0.1 meter lengths, from 0.5 to 3.0 meters.
Part Number coding samples:
SP-32-NG-FD-1.5 or SP-32-PG-FD-1.5
which means:
SureFire II Pilot
TM
-
32
mm OD - Natural Gas (
NG
) or Propane Gas/LPG (
PG
) -
Forced Draught (
FD
) -
1.5
meter insertion length.
Table 1:
SureFire II
TM
Forced Draught Pilot selection Table, showing only the 0.5 meter intervals, 0.1 meter intervals
may be ordered (See Price List)
REMARK: Select required kind of fuel. Select Electrical Igniter rod and power pack separately
Part No
Description
SP-32-NG/PG-FD-0.5
SureFire II
TM
Pilot, 32 mm OD, Natural Gas or Propane Gas, Forced Draught, 0.5 m Insertion length
SP-32-NG/PG-FD-1.0
SureFire II
TM
Pilot, 32 mm OD, Natural Gas or Propane Gas, Forced Draught, 1.0 m insertion length
SP-32-NG/PG-FD-1.5
SureFire II
TM
Pilot, 32 mm OD, Natural Gas or Propane Gas, Forced Draught, 1.5 m insertion length
SP-32-NG/PG-FD-2.0
SureFire II
TM
Pilot, 32 mm OD, Natural Gas or Propane Gas, Forced Draught, 2.0 m insertion length
SP-32-NG/PG-FD-2.5
SureFire II
TM
Pilot, 32 mm OD, Natural Gas or Propane Gas, Forced Draught, 2.5 m insertion length
SP-32-NG/PG-FD-3.0
SureFire II
TM
Pilot, 32 mm OD, Natural Gas or Propane Gas, Forced Draught, 3.0 m insertion length
The Table 2 below shows Part Numbers of gas igniter mounting tubes and spare parts.
Table 2:
SureFire II Pilot Mounting Tubes & Spare Parts
Part No
Description
SP-32-MTF
Mounting Tube Flanged, flange OD 80, length 120mm
SP-32-MTW-150
Mounting Tube for Welding, length 150 mm
SP-32-MTW-600
Mounting Tube for Welding, length 600 mm
SP-32/48-LS-SET Loose Spare Part set for SP32 and SP-48 pilots *
SP-32-FD-OS
Orifice-stabilizer assy: nipple with bleed and main orifice, mounting bracket, stabilizer, for SP-32-FD
* Loose Spare Part set includes items as on Fig. 5
Special Pilots:
Not all applications can be easily coded to cover every requirement. In order to provide for these, there is a
supplementary Part Numbering system. It is used in case of applications that require:
- other Natural gas or Propane gas capacity ranges than standard needed,
- other Fuel gas than specified above
–
see Remarks in Appendix 3,
- other pilot construction needed.
In such case please provide the data as in Table in Appendix 3, especially the gas composition. It is required
for the proper selection of materials used for pilot construction and feasibility of operation checking.
Part Number in such case is SP-32-ZYY-F-xxx where:
-
“
Z
” is capacity range e.g.
S
-small,
M
-medium,
L
-large or possibly others,
-
“
YY
” is the specific
Project Number
given by Fireye after analyzing the Proposal Data Sheet,
-
“
F
” is
Forced draught
,
-
“
xxx
” is the length
L
.
REMARKS: Fireye will provide a special price for the pilot after Proposal Data Sheet analysis.
Fireye may refuse to execute of an order if considered as impossible to complete.
