Firetide HotPoint 1500R, Руководство по установке оборудования

Страница: 18 / 25

Hardware Installation Guide
12
Power Options
There are various options for supplying power to the HotPoint 1500R outdoor mesh router.
Remote Power Aggregator Module
The remote power aggregator module provides power to the HotPoint 1500R enclosure from an
indoor AC outlet. The power supply is rated for 100-240VAC and you can utilize any country
power cord to provide power to the 1500R. You can also plug an optional power over Ethernet
(PoE) injector into the module to power two peripheral devices connected to the HotPoint 1500R
Ethernet ports.
Note: It is important to mount the Power Aggregator box with the Firetide logo upright. Not
doing so may cause confusion when connecting PoE devices.
THE REMOTE POWER MODULE IS FOR INDOOR USE ONLY
Feed the supplied power cable from the indoor AC outlet location to the HotPoint 1500R
enclosure.
INCORRECT WIRING MAY RESULT IN EQUIPMENT DAMAGE
When attaching the connectors, be sure to connect each of the four conductors to the correct
terminal. The connector is keyed so do not force the connector on the enclosure. Incorrect wiring
may result in equipment failure and possible damage.