HotPoint 1500R Outdoor Wireless Mesh Router
3
Mounting the Antenna
The antenna consists of an antenna shaft with an attached lightning protector and coaxial cable.
The antenna can be mounted directly to the Hotpoint 1500R or directly to a pole. The pole
structure can be either metal or wood.
Note: FCC regulations require Firetide to provide the antenna, lightning protector and cable
connected together. Disconnecting these items from each other is not supported by Firetide.
If longer distances of the coax cable are required, the connector requires a 50 ohm RP-TNC
(Reverse-Polarity- TNC) cable.
Mounting Guidelines
For best results, the mounting location should enable maximum performance of the antenna.
Note: Do not mount the antenna within 3 ft or 91.44 cm of another antenna. Interference may
occur.
OEM Integrators, end users and installers must be provided with antenna installation instructions
and transmitter operating conditions for satisfying RF exposure compliance. When mounting next
to an Access Point having the access point lower on the pole can achieve the spacing required
and utilizing a horizontal bar can also achieve the 3 feet spacing required.
For best results, position the HotPoint 1500R antenna above obstructions.
Содержание HotPoint 1500R
Страница 17: ...HotPoint 1500R Outdoor Wireless Mesh Router 3...