Firetide HotPoint 1500R, Руководство по установке оборудования

Страница: 14 / 25

Hardware Installation Guide
8
Mounting the Enclosure
The HotPoint 1500R enclosure should be mounted securely to a wall/wood structure or a pole
approximately 2” (51 mm) in diameter.
Mounting Guidelines
•
For best results, the mounting location should enable maximum performance of the antenna
and any attached devices such as access points or cameras. Whenever possible, provide
clear line-of-sight access for the antenna. You can test various locations by mounting the unit
to a portable stand until you can determine the ideal location for permanent mounting.
•
The location must allow for a solid connection to earth ground. Be sure the earth ground wire
or strap does not obstruct access to the enclosure.
•
The unit must be within 50’ (15.24 M) of an indoor AC outlet for power. Note: AC power is not
required if the HotPoint 1500R will receive power via PoE (power over Ethernet) from an
attached peripheral device or from DC Voltage source.
Wall Mounting
1. Attach the angled mounting brackets to the rear of the enclosure as shown.
2. Use four screws to attach the enclosure securely to the wall. Use appropriate anchors when
attaching to masonry or other materials
Wall and Pole Mounting