FireplaceXtrordinair 44 DV XXL EF Скачать руководство пользователя страница 3

Safety Precautions

3

Travis Industries

9 3 5 0 8 1 0 9

1 8 0 5 0 1

AAA

AA

AA

¥

Do not place clothing or
other flammable items on or
near the heater.  Because
this heater can be controlled
by a thermostat there is a
possibility of the heater
turning on and igniting any
items placed on or near it.

AA

AA

AA

AA

A

¥

Light the heater using the
built-in piezo igniter.  Do not
use matches or any other
external device to light your
heater.

¥

Never remove, replace,
modify or substitute any part
of the heater unless

AAA

AA

AA

AA

AA

¥

The viewing glass should be
opened only  for lighting the
pilot or conducting service.

¥

Any safety screen or guard
removed for servicing must
be replaced prior to
operating the heater.

¥

Do not operate with the
glass removed or damaged.

instructions are given in this
manual.  All other work must
be done by a trained
technician.  Don't modify or
replace orifices.

¥

Allow the heater to cool
before carrying out any
maintenance or cleaning.

¥

Operate the heater
according to the instructions
included in this manual.

¥

If the main burners do not
start correctly turn the gas
off at the gas control valve
and call your dealer for
service.

¥

The pilot flame must contact
the thermopile and
thermocouple (see the
illustration to the left).  If it
does not, turn the gas
control valve to "OFF" and
call your dealer.

AAA

AA

AA

A

A

A

A

¥

This unit is not for use with
solid fuel

¥

Do not place anything inside
the firebox (except the
included fiber logs).

¥

If the fiber logs become
damaged, replace with
Travis Industries log set.

This
Manual

¥

Do not throw this manual
away.  This manual has
important operating and
maintenance instructions
that you will need at a later
time.  Always follow the
instructions in this manual.

AAA

AA

AA

¥

Do not touch the hot
surfaces of the heater.
Educate all children of the
danger of a high-
temperature heater.  Young
children should be
supervised when they are in
the same room as the
heater.

AAA

AA

AA

36"

¥

Keep all furniture or other
combustible items at least
36" away from the front of
the fireplace (this includes
drapes or doors that may
swing within 36" of the front
of the fireplace).

¥

Instruct everyone in the
house how to shut gas off to
the appliance and at the gas
main shutoff valve.  The gas
main shutoff valve is usually
next to the gas meter or
propane tank and requires a
wrench to shut off.

¥

Travis Industries, Inc.
grants no warranty,
implied or stated, for
the installation or
maintenance of your
heater, and assumes
no responsibility of any
consequential
damage(s).

Содержание 44 DV XXL EF



























































Отзывы: