FireplaceXtrordinair 36 ELITE-ZC, Руководство по установке

Страница: 7 / 24

I
NSTALLATION
(C
ONTINUED
)
P
AGE
7
Raised Fireplaces
• If the fireplace is raised more than 15” above the sub-floor, the fireplace
enclosure will have to be raised accordingly (see “Minimum Framing
Dimensions” on page 3).
+ The fireplace may be placed on a platform designed to support the fireplace and vent
(Approximately 600 Lbs.).
AAAAAA AAAAAA AA
AA
AA
AAAAAAAAA
AAAAAAAAA
A
A
A
A
AAAAAAAAA
AAAAAAAAA
AA
AA
AA
Minimum 1" cement board
Fireplace
Ember
Strip
2 x 4 Framing
No combustible material
permitted above this point
15"
Raised
hearth
3/4"
Plywood
AAAAAAAAA
AAAAAAAAA
A
A
A
Fireplace
2 x 8 Framing
Faceplate
Ember
Strip
15"
Raised
hearth
Elevated hearths must be
constructed of non-combustible
materials such as cement blocks
(6-1/2” Max.).
Header height needs to be
increased this dimension.
Header height will
need to be increased
this dimension.
Tile or
marble
3/4"
Plywood
Tile or
marble
Facing Requirements
NOTE: Artisan faces vary in size. If the facing is over 1” thick (brick, river-
rock, etc.) use the face being installed to create a template.
• The fireplace is shipped with a set-up face that is 1/16" larger on the top, bottom and each side than
the faceplate. Leave the set-up face in place to act as a template when installing the facing.
• The fireplace requires 1/2" thick concrete-board or other non-combustible to extend from the header
to the base of the fireplace and to the framing members on both sides (do not use sheetrock or
drywall).
• The non-combustible facing must extend a minimum of 12" above and 2-1/2" to each side of the
faceplate.
• The non-combustible facing must be a minimum 1" thick
• The facing may be attached to the front of the fireplace with screws. Do not penetrate the fireplace
more than 3/4”.
AAAAAA
AAAAAA
AAAAAA
AAAAAA
AAAAAA
AAAAAA
12" (min.)
2-1/2"
(min.)
Cement-board must
extend from the header
to the floor and to the
framing members on
both sides.
Non-combustible
Facing
Keep the set-up face
on the fireplace when
installing the facing.
• Facing may be installed so it inserts behind the faceplate. NOTE: the faceplate protrudes 1" from the
front of the fireplace, has a 1/8" overlap on the sides, and 1/4" overlap on top.