Page
24
Notifier Inertia-888 User, Technical & Programming Manual
Copyright (c) 2005, Notifier Inertia
ACF PROGRAMMING
Press the
PROGRAM
key once.
Press the
ACF ISOLATE
key
The Isolate led will indicate the current ACF output type (
AZF1 for Latching, AZF2 for Non-Latching
).
To change the ACF output type
Press
1 or 2
(an incorrect entry will give a long beep and be ignored)
1 for Latching
2 for Non-latching
Otherwise press program to look at another output or zone.
Example.
To set ACF to LATCHING do as follows.
Make sure you are in programming mode
Press
PROGRAM
ACF
ISOLATE
1
AUXILIARY RELAY PROGRAMMING
Press the
PROGRAM
key once.
Press the
AUXILIARY RELAY
key
The Fault and Isolate LED's will indicate the current Auxiliary relay output type. (Fault
showing the first digit & Isolate showing the second digit)
To change the Auxiliary relay output type
Press the first digit of Auxiliary relay output type (
1-2
)
Press the second digit of Auxiliary relay output type (
1-8
)
(an incorrect entry will give a long beep and be ignored)
Example.
To set Auxiliary relay to General Alarm do as follows.
Press
PROGRAM
AUXILIARY
RELAY
2
2
